L3 stormscope installation manual
Processor Fault. No test strikes, antenna in noisy location, or faulty antenna. Weather mapping is inhibited. If airborne near Annapolis, may be ground transmitter. Fault will clear automatically if interference subsides. Invalid test strikes, antenna in noisy location or faulty antenna.
This may occur the first time the system is powered on in a new installation or after the configuration wiring is changed. Check jumper selection in mating connector assembly refer to paragraph 2. At MFD, select antenna location. The system is configured for synchro heading but the XYZ synchro signals are not present or are out of specification.
Check configuration wiring to make sure system is set up for proper heading type stepper, synchro or serial. The system is configured for synchro heading but the heading reference Hz is not present or out of specification. Heading stabilization is not available. Mic key inhibit line has been asserted for at least 60 seconds. Once on this LED does not turn off until power is recycled. The display could be causing excessive current draw on the power supply in the processor, and there could be a problem with the display and the processor.
Error Time of day and elapsed time are not available. The real-time clock battery is dead,. It is actually part of a battery-backed RAM and is embedded into an IC on a printed circuit board in the processor. Check Hz source. There is also a stack of three printed circuit boards that are about 3" x 7" and the stack is less than 2" tall, i. Their function is both the "processor" and the display electronics. Manual -. Ant Conn 10 male pins, 3 lug.
The display looks like a CRT. Connector: DBm. Patent: This matches neither the pin numbers nor voltages in the WX manual Ref 1. Connector: DBm Sheet metal box mates with back, similar to mounting tray, but just the box. Patents: , , , , others. The product name is Strike Finder. Storm Monitor only shows up on patents.
Came before the Ryan StormScope. Strike Finder Still being sold. P Krider , R. Noggle , M. Krider , Ralph C. This item is used equipment and we are selling this item untested, without warranty or return. We do not provide any warranty of this item whatsoever, whether express, implied, or statutory, including but not limited to, any warranty of "merchantability" or "fitness for a particular purpose" or any warranty that the contents of the item will be error-free. We are not liable for any damages, including, but not limited to, direct or indirect, special, or consequential damages arising out of, resulting from, or any way connected to the use of the item, whether or not based upon warranty, contract, tort, or otherwise; whether or not injury was sustained by persons or property or otherwise; and whether or not loss was sustained from, or arose out of, the results of, the item, or any services that may have been provided by us.
0コメント